The Anycubic Company is a well-known 3D printer manufacturer that operates from Shenzhen China. The company has carved an enviable reputation for itself in the world of 3D printers. One of their core objectives was to take the 3D printer out of the science lab and make it available to the masses.
Keeping this ambition in mind they have gone on to release a few widely popular and award-winning printers including the Photon SLA printer, the Anycubic Mega i3, as well as the Kossel Delta.
As of now, Anycubic has released its latest offering: The Anycubic Predator. The newest member of the Anycubic D family is definitely a chip off the old block. In this review, we will take a quick look at the specs, features, and everything else that makes this 3D printer the ideal choice for many people on a medium sized budget who want to purchase their very first printer.
Anycubic Predator Review and Performance
Unboxing the Predator
The good news is that the designers at the company have included just about everything that you need in order to print as well as maintain your printer so that it continues to work for a long time. In the box you will find the following:
- A set of 10 screws
- Card reader
- USB cables
- User manual
- SD card
- PLA filament
In short, you have everything you need to assemble your Anycubic Predator Delta 3D printer the very moment it arrives and you can get it up and running within an hour at most. Once done you can commence printing your very first model immediately afterword.
Key Features of the Anycubic Predator Printer
Some of the top features that enable the Predator printer to stand out from its class include the following ones:
The Ultrabase Pro Heated Bed
This should not come as much of a surprise that the good people at Anycubic have equipped their star printer with their trademark Ultrabase Pro heat bed. This bed offers universally strong adhesion throughout the printing process, due to its high quality layer of fine and porous coating.
At the same time, it will also allow you to safely and easily remove your builds without any sort of hassle after the platform has cooled down completely. However, Anycubic has still thoughtfully included a scraper with the printer, just to be on the safe side.
The bed also heats up a whole lot faster than many other printers in its price range. This has a lot to do with the fact that the internal voltage has been upgraded from the run of the mill 12 volts all the way up to 24 volts. Anycubic D claims that its Ultrabase Pro heat bed will heat up all the way up to 100 °C. This is deemed ideal for many building materials.
Large Build Volume
Delta printers are not exactly renowned for their print volume due to the very nature of their construction and print head. However, the Anycubic Predator has sought to prove the naysayers wrong thanks to its large build size and volume high quality print head.
As a matter of fact, the Predator features what might possibly be one of the largest build-volumes of just about any Delta printer that is currently available out there on the consumer market.
Thanks to its massive 370 x 370 x 455 mm building volume, we can see that this printer has few rivals and hardly any superiors in the size department, barring the Tevos Little Monster that clocks in at 500 mm. However, it still outshines the Tevos in the printing department due to its larger diameter since the Tevos machine only prints a maximum of 340 mm in diameter.
37 Points for Auto-Leveling the Printer
Anycubic’s Ultrabase is also available with many other third-party printers too. However, in their case, it does not always support the auto-leveling feature. Many 3rd party printers have problems when it comes to noticing the ultra-thin glass layer that has been placed on top of the build plate.
This means that the users will have to painstakingly level the bed on their own before the commence printing anything. However, this does not apply to the Anycubic Predator 3D printer though. As per its specs, the unit measures approximately 37 points on the build plate. Apart from that, it also actively supports actual real-time adjustment of the nozzle height too.
Apart from the above, the new Anycubic Predator printer has been equipped with a very large number of sensors. For example, there is the filament sensor that will alert you whenever the filament has run out or even if it has broken. This sensor helps to make sure that print quality is never compromised.
This printer also has another helpful feature which consists of the resume printing option. This feature comes in very handy in case there is a power outage. This feature is activated by the electricity sensor that detects when the power has come back on.
In that case, it stops the printing process at the same point so that you will be able to resume it, thus saving many hours or perhaps days of hard work, This feature makes sure that you won’t have to restart the printing all over again This is a clear cut case of better having it and no need it than to not have it when you need it.
It holds particularly true if you intend to take advantage of the Anycubic Predator printer’s extra-large building capacity as well as a fast-heating hot end.
Solid Metal Construction
The Anycubic Predator has been constructed using very solid metal rather than cheap plastic. This makes it extremely durable. Apart from that, the frame is also quite stable so that there is no issue of a wobbly print bed, nor would you have to worry about your printer shaking a lot when it is in use.
This delta 3D printer is a great purchase for people who are interested in ‘Do it Yourself’ (DIY) project style printers. Since the unit comes semi-assembled, not only can you set it up in no time at all, but also enjoy yourself during the process while you create print after print!
The Predator 3D printer has the following specs:
- Mechanical Arrangement: Delta Style
- Technology: FDM
- Assembly: Semi-Assembled
- Year: 2018
- Manufacturer: Anycubic
3D Printing Properties
- Layer Resolution: 0.05 – 0,3 Mm
- Build Volume: 370 X 370 X 455 Mm
- Nozzle Size: 0.4 Mm
- Printing Speed: 20 – 150 Mm/S (Recommended 60 Mm/S)
- Extruder Type: Single
- Positioning Accuracy: X/Y/Z 0.0125 Mm
- Max. Extruder Temperature: 250 °C
- Max. Heated Bed Temperature: 100 °C
- Print Chamber: Open, Not Enclosed
- Build-In Camera for monitoring purposes: No
- Bed Leveling: Automatic
- Filament Sensor: Yes
- Connectivity: SD Card
- Filament Diameter: 1.75 Mm
- Third-Party Filament: Yes
- Filament Materials: PLA, Wood, ABS, Hips, TPU
- Recommended Slicer: Cura, Simplify3d, Repetier
- Operating System: Windows, Linux, Mac OS X
- File Types: Stl, Obj, Dae, Amf
Dimensions And Weight
- Weight: 19.2 Kg
- Assembled Dimensions: 580 X 520 1020 Mm
- The Anycubic Predator is a very well-built as well as a sturdy 3D printer that is capable of a high-speed 3D printing process
- It feels rock-solid thanks to its firm base
- This printer does not rock either back and forth or side to side when printing
- The extrusions are perfectly uniform and they always work as they should to make printing a breeze
- All the printer hardware is excellent, and it has been made up of quality materials
- Good build volume for its size
- Extra fine nozzle
- Awesome print quality
- Even the most perfect printers have a few flaws and the Predator is no exception to this rule. Some of the more important cons of this unit include the following:
- Many users have complained about the Ultrabase Pro since 3D prints don’t always adhere to the print bed.
- You will have to let the print bed cool down completely before you may start removing your build, otherwise, it might be damaged. This process can take a long time.
- Using the scraper provided by the company to scrape off the build might result in severe damage to the print.
- The firmware is not an open-source design so tinkering and tweaking is going to be very difficult
- The machine lacks community support
The Predator is a state of the art 3D printer that has been created with the help of cutting edge technology of the kind generally available in more expensive models. It has been made with very sturdy and good quality materials and has great build size for its price.
However, Anycubic’s customer service system leaves a lot to be desired and you might have to face difficulties in procuring spare parts for it.
1Kg PLA Included
Large Delta 3D Printer from AnyCubic
Anycubic Predator Highlights
- The Anycubic Predator has an all solid metal frame and a heated print bed.
- Automatically detects 37 points for easy auto leveling. Supports real time adjustment of Nozzle height.
- 24V DC high power heated bed, Fast heating up to 100C
- Anycubic ultrabase pro for excellent adhesion. Effortlessly pop the model out from the build surface
- Amazing Huge build volume 370mm D and 455mm H.
- Flying Extruder: Good retraction without stringing/friction. Making momentum shifts much easier. Able to achieve high print speed. Better results on Flexible filaments.
- Easy to set up.
- Interactive Full color touch screen for a more intuitive user experience.
- Filament Sensor NEW DESIGN will alert you when the filament has ran out or broken
- AUTO RESUME PRINT function: Resume Print, which stores the print information and position of the print head in case of power failure or similar
- 3D Prints PLA, ABS, PETG, PC, TPU, Copper and Wood fill
- Anycubic Predator offers a SD card reader and USB connectivity
- 0.4 mm nozzle standard
- Compatible with Simplify3d, Cura, Slic3r and Repetier Host software
- Maximum nozzle temperature 250 C
- Maximum bed temperature 100 C
- All tools needed for assembly are included
- Some assembly required but it is simple and suitable for "Newbies"
Note: This 3D Printer is mostly assembled, no soldering required. You will just need to connect the upper and lower frame together and plug in some connections.
|Technology||FDM (Fused Deposition Modeling)|
|Build Size||φ370mm(D) x 455mm(H)|
|Layer Resolution||0.05-0.3 mm|
|Positioning Accuracy||X/Y/Z 0.0125mm|
|Nozzle/Filament Diameter||0.4 mm/1.75mm|
|Print Speed||20~150mm/s (suggested 60mm/s)|
|Supported Materials||PLA, ABS,TPU, HIPS, Wood|
|Ambient Operating Temperature||8°C - 40°C|
|Operational Extruder Temperature||max 250°C|
|Operational Print Bed Temperature||max 100°C|
|Slicer Software||Cura, Smplify3D, Repetier-HOST|
|Software Input Formats||.STL, .OBJ, JPG, PNG|
|Software Output Formats||GCode|
|Connectivity||Memory card; Data cable(expert users only)|
|Input rating||110V/220V AC, 50/60Hz|
|Working Voltage||12V DC|
QQ Video about Anycubic Predator Printing
- Online coloring animals
- Suture anastomosis
- Bike trails charlottesville
- Pennsylvania trapping regulations
- Bibigo stock
Anycubic is one of the most popular 3D printer brands in the market right now, based in China and founded in 2015. Their aim is to make 3D printers accessible and affordable to most consumers, rather than being for people with big budgets.
It’s great to know that even with their great price points, they definitely do not skip` out on quality or durability.
Now the first thing you’ll need to know is, this is a huge printer, so make sure you actually have the space to let the printer perform it’s duties. It’s over 1 metre tall and 0.5 metres wide at a weight of near enough 25KG.
If you’ve been looking for a printer with some serious printing dimensions, you’ve came to the right place. The Anycubic Predator Delta Kossel (Amazon) packs a real punch with a whopping 370 x 370 x 455 mm build size which is bigger than most 3D printers out there.
It’s a single extruder, 1.75mm FDM printer with many features that you will appreciate.
It’s fast, reliable and well built at an amazing price point compared to other similar 3D printers out there. The common consensus when people talk about the Anycubic Predator Delta is how it beats out it’s competition with ease by being just a top quality printer with all the features you’d want in a 3D printer.
When you compare the features and benefits to other printers in the same calibre, this 3D printer comes out on top.
- Anycubic Ultrabase Pro – Glass Surface
- Automatic Levelling
- Resume from Power Loss Function
- Filament Run-Out Sensor Function
- Titan (clone) Bowden ‘Flying’ Extruder
- Trigorilla 32 bit Motherboard
- 1000W 24V 41.7A Power-Supply
- 24V 360W Heated Bed
- V6 Clone Hotend
- Two Filament Cooling Fans
- Carbon fibre arms that connect the print head and aluminium sliding carriages together
- Adjustable belt tighteners
- Optimal stop sensor limit switch for each carriage
Anycubic Ultrabase Pro – Glass Surface
The printing platform has great adhesion, easy removal of prints and is very durable. It’s covered by a special layer of micro-porous coating which gives you that reliable adhesion, a very flat surface and efficient bed heating.
All you have to do is let your object and platform cool down before simple removing the object from the print bed. With larger objects, using the scraper is recommended as they are stuck down a little stronger.
This system will automatically detect 37 points around the surface and supports real-time adjustments and compensation of your nozzle height. You want to avoid 3D printers that don’t have automatic levelling as it’s just more hassle and it takes away your focus into getting high quality prints.
Simply set up the automatic levelling function on the printer and let it work for you. The good thing about it is in the event that your print surface becomes uneven, your printer will take the levelling results into account while moving around, or in other words, real-time compensation of the nozzle height. This ensures that prints run smoothly.
Resume from Power Loss Function
Simply use the resume button with one click to continue printing from where it left off. This gives you the peace of mind of not having to worry about long prints failing. It doesn’t happen often but there are many cases of prints that last several hours failing due to this exact reason.
The manufacturers are aware of this so they made sure to implement this feature to avoid that frustrating failed print. Your printer will store information from your print, as well as the position of the print head and auto resume the print, usually as a result of a power failure or something similar.
Filament Sensor Function
As most 3D printer users know filament can run out during a print, especially with a printer as big as the Anycubic Predator Delta printer. So it’s built-in filament sensor is a life-saver that will auto pause when filament has run out, allowing you to replace your filament before it continues to print.
Without this function, a printer will keep moving around the print bed thinking it’s printing, wasting a lot of valuable printing hours and filament from having to start the print all over again.
Interactive Touch Screen
The touch screen is a full color, user-friendly and multi-language device that makes the printing process very easy. It’s a nice, bright, sharp and responsive interactive screen which gives users a more intuitive user experience.
Solid Metal Construction & Modular Design
Due to the modular design of the printer, you can be quick to start printing as it can be assembled quickly.
It makes the assembly process simple, fast and convenient and it’s designed specifically so you can have a smooth creation experience.
Many users get plagued with issues that they can’t figure out, and a lot of the time it does come from a loose frame. Anycubic has made sure to keep this in mind when creating this 3D printer. Even the wiring is done very thoughtfully and organised.
The heavy-duty, rigid Delta structure means that you’ll have minimum shaking during the printing process, saving you quality and troubleshooting issues.
Titan (Clone) Bowden ‘Flying’ Extruder
Bet on better results with flexible filaments due to the flying extruder. You’ll get some good retraction on your extrusions without all of the stringing and friction. An important benefit of this extruder is the momentum shifts being made easier.
This printer can print at a fairly high speed and you’ll get accurate extrusions so you can get good results reliably. It supports many materials from PLA, ABS and TPU.
V6 Hotend (Clone)
This hotend is a clone of an E3D hotend which has the PTFE tube leading through to the heat break. It’s advised to upgrade to an all-metal version if you want to expand your variety of filament that you can print with, unless you are fine with printing just PLA. You also get a spare hotend with this printer as well as brass nozzles in several different diameters, from 0.4mm to 0.8mm.
Trigorilla 32-Bit Motherboard
This is a 32-bit board that can run complex calculations quickly resulting in a faster printer. It’s what gives the printer it’s resume from power loss function. This motherboard is also used on the Mega i3 but it doesn’t run open-source firmware, instead opting in to run it’s own firmware called Chitu.
Heated Bed – 24V 360W
High-powered heated bed that aids your printing materials to stay in it’s optimal condition to give you a smooth print. This 24V DC high-powered heated bed will heat at speed up to 100°C. It’s fitted to the printer so it’s more secure and doesn’t have to be held in place by clips.
Adjustable Belt Tighteners
You have a built-in belt tensioner so you no longer have to tighten things up with the compression springs. Even though most people are used to these springs, this setup still works pretty well. They are rigid, tight and will produce great prints time after time.
The belts aren’t anything special, just simple tension belts with toothless idlers across the bottom. They are very easy to adjust.
- Layer Resolution: 0.05-0.3 mm
- Printing Precision: ±0.1 mm
- Printing Speed: 20-150mm/s (60mm/s recommended)
- Compatible filaments: PLA, TPU, Wood, Copper, Rubber
- Build Size: 370mm (Diameter) 455mm (Height)
- Nozzle Diameter: 0.4mm standard nozzle
- Software: Compatible with Cura, Simplify3D and Repetier-Host
- Technology: FDM (Fused Deposition Modeling)
- Extruder Quantity: Single
- Filament Diameter: 1.75mm
- Supported Materials: PLA, ABS, TPU, HIPS, Copper and Wood fill, PETG, PC
- Maximum Extruder Temperature: 250°C
- Maximum Bed Temperature: 100°C
- Connectivity: Memory card, SD card reader, and USB connectivity
- Working Voltage: 24V DC
- Printer Dimensions: 580mm×520mm×1020mm
Besides the arsenal of features that you get with the Anycubic Predator Delta Kossel 3D printer you can count on getting the following benefits:
- Easy to set up to help get printing quickly (color user manual and detailed tutorials)
- All tools needed for assembly are included plus many more
- Improved packaging to ensure safe delivery to your door
- Great customer service and technical support for a lifetime
- Excellent print quality with little errors
- Competitive price for better quality
Nothing is perfect so although it’s a great printer, it does have its cons which I’ll explore in this section.
Reportedly the auto-levelling doesn’t work as good as other 3D printers but still fairly good. The Predator has 37 levelling points, while the Kossel has 68. The Kossel also automatically finds the z-height at the same points.
The motherboard isn’t modular and open so it’s not so easy to get this upgraded with Marlin and TMC drivers, which would potentially solve some issues with this printer.
Reports of the build surface heating up quickly but not evenly. There are accessories you can purchase to reduce this happening so your print quality is as best as it can be.
It comes with A4988 drivers which result in a printer that’s pretty loud. You also have the fans running which also make noise. You can change to newer TMC2208 drivers but you’ll have to get a new controller. Check out my post on how to reduce noise from a 3D printer to combat the issue of loud printers.
Firmware wise it doesn’t run Marlin or other popular firmware, and instead runs on Chitu. You can’t use the regular M codes that you would use Marlin so stick to Chitu’s functions.
Potential Modifications for the Anycubic Predator
The competitive price of the Anycubic Predator Delta Kossel printer is sometimes hard to believe but it’s a solid printer that gives great results. It’s impressive build size is what makes it such a great unique printer compared to most out there.
Users of this printer sing nothing but praises, with its very sturdy design and no movement while printing giving it great quality prints. The construction of it really is outstanding.
If you print with just PLA the hotend is great as the PTFE liner goes straight through to the nozzle, while if you plan to print ABS it won’t do you justice. This is where some modifications can be in your benefit.
The issue with the controller is not being able to swap the drivers around, so you have to stay put with the A4988 and the Chitu software but you can operate at a great level with them. You can still change the controller for a better one but it’s a cost you’ll have to absorb.
Build volumes pretty much dictate how big a 3D model you can print with a 3D printer. Bigger build volumes mean that you can print objects that can cover a bigger area, or if you need to put it together into one bigger object, you’d need to have less moving parts.
What’s more, if you’re currently using a mini printer, having access to one that has a bigger build volume means that you can print your current models on a larger scale with more details.
Usually, when you see a 3D printer that has a large build volume, you assume that it’s expensive. Not the Anycubic Predator. This Delta-style printer has a sizable build volume and a frame that’s made with quality materials but with a price tag that you will certainly love.
What are the things that you should know about this Anycubic 3D printer? Are there some downsides to owning an Anycubic Predator? Are there any alternatives that you can consider? Further, should you buy the Anycubic Predator? Read on and find out.
Anycubic Predator: What You Need to Know
A do-it-yourself 3D printer kit, the Anycubic Predator is made with solid metal, making it very durable. The frame is also very stable so you don’t have to worry about the 3D printer shaking too much when in use.
The Anycubic Predator has a build volume of 14.6 by 14.6 by 17.9 inches (370 by 370 by 455 millimeters), which is larger than most 3D printers out there. It has a layer resolution of anywhere from 0.05 to 0.3 millimeters and positioning accuracy of 0.0125 millimeters on all three axes.
What’s more, it can use any PLA, ABS, HIPS, wood filled, or TPU filaments that have diameters of 0.4 to 1.75 millimeters. Print speed range from 20 to 150 mm per second (0.79 to 5.9 inches per second).
The Predator comes with an auto leveler that keeps track of 37 points. Plus it can do real-time adjustments, without you having to do anything. The nozzle height is also automatically adjusted in real-time. Other features of the Predator include:
- Ultrabase Pro: The print bed, which can hold the models in place but still be easily removed. The bed is very durable.
- Filament sensor: Can alert you when filaments run out or when they break.
- Touch display: Operate your printer with ease with the full-color control panel with its intuitive user interface.
- Resume: The printer can resume printing after it’s been interrupted by a power trip. You don’t have to worry about wasted prints that take a long time to finish.
What’s in the Box
The good news is that Anycubic has included everything you need to print and maintain your printer in the box, including the:
- 10 screws
- Card reader
- PLA filament
- SD card
- USB cables
- User manual
That means that you can assemble your printer the moment it arrives, and then print your first model shortly thereafter.
What You Would Like About the Anycubic Predator
The Anycubic Predator is a well-built, sturdy, and stable 3D printer that feels rock solid. It does not rock when printing and the extrusions are quite uniform and work as they should. The hardware you see here is excellent, made with quality materials.
What Can Be Better
Some users complain about the Ultrabase Pro because the objects being printed don’t really adhere to the print bed. A good workaround is to use regular school glue before you print anything. You will also need to let the print bed cool off before you remove the print to avoid damaging it. You should not even try to remove it using the scraper that comes with the package.
What some people do not like is that the firmware is not open source. This means that you will not be able to tinker with it, or you might have a challenge doing so.
The biggest tradeoff, however, is the lack of support. If you need to buy parts for your Predator, you might find that the customer service is not that responsive. They do not provide shipping updates, tracking numbers, or general feedback for your purchase.
Also, this printer is huge at 22.8 by 20.5 by 40.2 inches (580 by 520 by 1,020 millimeters). You will really need to find a place for it on your worktable.
Anycubic Predator: The Bottom Line
The Anycubic Predator is an excellent printer with all the great technologies you will expect to find in a more expensive model. It’s also perfect for those who like to tinker with their 3D printers because you will need to assemble it and then twiddle with it to make it better. It uses sturdy and durable materials, offers a sizable print volume, and print quality is okay.
It is, however, bogged by the lack of customer service. That is, it’s a good printer until you need to have some parts replaced.
Anycubic Predator Alternatives & Competitors
If you’re looking for a budget 3D printer that doesn’t scrimp on the quality, the Anycubic Predator can be the right choice for you. But it’s not the only affordable printer out there that offers a huge build volume, excellent prints, and an attractively low price tag.
1. Geeetech A20M 3D Printer
The Geeetech A20M 3D Printer is a 3D printer kit that has an aluminum alloy body and uses a Bowden extruder. Assembly is quite easy, especially if you have another person to help you.
Perhaps, the biggest feature that will intrigue you is the mix-color feature. The A20M has two slots for two different filaments, but it uses only one nozzle. This means that you can blend colors while printing.
You can easily achieve color gradation or having the spectrum effect, using the slow transition from one color to another. You can also have the printer print in the two colors without blending it, making it seem like you’ve changed the filament midway.
What You’d Like About the Geeetech A29M
If you assemble this 3D printer right, you will probably have no problems with it. It’s very stable, and the materials used are durable. It has a high-quality look that makes it more expensive than its price tag.
The color mix feature is a good addition as well. What’s more, the electronics are at the bottom, which makes the printer even more stable.
What Can Be Better
Some users might find it difficult to level the bed, as it can wobble too much if not installed properly. Also, the user interface is not that intuitive. For some reason, the company didn’t include a touch display, so you have to tweak the setting using a dial.
Having to turn the dial is a departure from the tap and click type of interaction that we’re all used to by now. Plus, it might not be easy to find the features that you need.
Geeetech A20M 3D printer delivers mix-color objects and greatly enriches your 3D printing life. Keeping the good performance of Geeetech 3D printers, it aims to provide users with quality printout and good printing experience.
We earn a commission if you click this link and make a purchase at no additional cost to you.
10/17/2021 08:44 am GMT
Geeetech A20M: The Bottom Line
Compared to Anycubic Predator, the Geeetech A20M has a smaller footprint at 17.4 by 17.6 by 18.9 inches (442 by 447 by 480 millimeters), still bigger than your regular desktop FDM printer. It also has a smaller build volume at 10 by 10 by 10 inches (255 millimeters all around).
However, it is also cheaper than the Predator and delivers pretty much similar print quality.
Barring some mechanical issues such as having loose or tight adjustments to the print bed, the Geeetech A20M is an affordable 3D printer kit that does a good job overall.
- Sizable build volume
- Print quality is fine and detailed
- Can support two filaments with color mix features
- If not properly installed, the base can be wobbly
2. Artillery Sidewinder X1
The Artillery Sidewinder X1 comes from a new company that started offering 3D printers in late 2018. That’s both a good and a bad thing. To be honest, the company’s first products received a lot of bad feedback. But the nice thing about Artillery is that they took these feedbacks and incorporated changes into their later products.
The Sidewinder X1 features some nifty features such as a silent set of fans and the equally noiseless motherboard. It also has a heated bed and a direct drive system. It boasts of a build volume that measures 11.8 by 11.8 by 15.7 inches (300 by 300 by 400 millimeters) on a body that measures 21.7 by 15.9 by 25.2 inches (550 by 405 by 640 millimeters).
The chassis is very sturdy and durable. And it looks great as well. One of the notable design differences that the Sidewinder X1 has is the use of ribbon cables. The ribbon cables reduce the cluttered look of loose cables used by similar printers.
The heated print bed is made with a porous ceramic that is covered by a glass protector. It only takes about 45 seconds to heat the bed to 140 degrees Fahrenheit (60 degrees Celcius).
What You Would Like About the Artillery Sidewinder X1
The Artillery Sidewinder X1 is a budget printer that doesn’t look or work like one. It has quality materials that make up the sturdy frame and a fast-heating print bed.
What’s more, it features a direct drive setup that is rare if you consider its price range. The user interface is intuitive and the 3.5-inch (89 millimeters) touch display is easy to see. Installation and setup is a breeze and fast.
What You Might Not Like About the Artillery Sidewinder X1
One of the things that this 3D printer lacks is the sensors that will allow you to automatically level the bed. Instead, you have to do some manually leveling.
There are also concerns about the durability of some of the printer’s components. For instance, you might find that the ribbon cables can break over time. What’s more, the printer does wobble when you print something tall using certain filaments.
Should You Choose This Printer over the Anycubic Predator?
There are some things that the Sidewinder X1 has that you cannot find in other affordable Cartesian 3D printer. It’s refreshing to see a direct drive extruder as well as a directly heated print bed on a budget device. It has a sleek look and can work quietly, while also delivering a decent quality for your prints.
Compared to the Anycubic Predator, this printer has a smaller build volume. Plus, you will probably need to fiddle with the settings a bit to get the best quality prints out of this device. The Sidewinder X1 is also more affordable than the Predator.
- Well-designed and sleek-looking
- It heats up quickly allowing you to start printing in a matter of seconds
- Silent worker
- The helpful online user community
- The filament holder needs to be replaced
- Uneven heat
3. Qidi Tech X Plus
The Qidi Tech X Plus is yet one of those budget printers that aims to surprise you with quality prints. You can get layers that are as thin as 50 microns. you can also use a wide assortment of filaments.
The Qidi Tech X Plus has two extruders, filament compartments, and a double-sided bed. These accessories allow you to easily change out the various components so you can get the perfect prints depending on your preferred filament.
What’s more, it gives you several options on how to connect Wi-Fi, tethered and untethered USB, and Ethernet. The build volume for the Qidi Tech X Plus is the smallest out of this bunch, measuring only 7.9 by 7.9 by 10.6 inches (200.7 by 200.7 by 269.2 millimeters).
What You Would Like About the Qidi Tech X Plus
There are a lot of nifty features on this printer that you will like. There’s the two-extruder setup, where you can use the A Extruder for general printing materials such as TPU, ABS, or PLA. There’s also the B Extruder for special filaments such as carbon fiber, PC, and nylon.
The difference lies in the maximum temperature that each extruder can get. The A Extruder can get as hot as 500 degrees Fahrenheit (260 degrees Celsius) while the second extruder can get as hot as 572 degrees Fahrenheit (300 degrees Celsius)
It also has a dual-sided print bed that can handle different sets of materials as well. There are two filament holders as well.
Plus, unlike other printers in this roundup, the Qidi Tech X Plus arrives fully assembled, so you don’t have to worry about screwing things together and all that. It’s also fully enclosed, so noise levels are kept at a very quiet 40 decibels.
What You Might Not Like About the Qidi Tech X Plus
Qidi Tech has a language barrier problem in that they seem to be struggling to find English speakers and writers who can write their instructions pretty well. The instructions included in the package are confusing and some steps are missing, making it difficult to follow.
Even their customer service and website can be quite confusing. Thankfully, the QiDi Tech X Plus is easily assembled following what you can understand in the manual.
Also, some online tutorials and forums can help you figure things out if you’re stuck.
The QIDI TECH X-plus combines all the features you want in a 3D printer like quiet printing, air purification, Wi-Fi connection, one button quick leveling, breakpoint printing, etc.
We earn a commission if you click this link and make a purchase at no additional cost to you.
10/17/2021 05:04 pm GMT
Qidi Tech X Plus: The Bottom Line
When it comes to budget printers, Qidi Tech X Plus shows you that you can save money and still expect quality prints. This 3D printer makes it easier for you to work with a wide variety of filaments without having to go through the trouble of manually changing out the print bed and extruders.
What’s more, there’s no assembly required, so you can start printing once you get it out of the box.
- You can use a wide range of filaments
- Easy to set up and use
- Good quality prints
- Badly written documentation and customer service representatives can use English lessons
The extruder is one of the most important components of 3D printers. The extruder pushes the filament to the hot end where it is melted.
A direct extruder is one that is attached to the hot end itself. It’s part of the print head and delivers the filament straight to the hot end.
Because the filament travels for a short distance, direct extruders have better extrusion and retraction and the filament is more responsive to it. It also doesn’t take too much power from the stepper motor. Further, direct extruders work with more filaments, even the abrasive and flexible ones.
A Bowden extruder, on the other hand, is not attached to the print head, but someplace else, usually the printer body. It uses a tube to deliver the filament to the hot end.
Because of this, the print head is much lighter, more accurate, and faster because it doesn’t carry the additional weight of the extruder. Products that use a Bowden extruder tend to have higher quality or faster prints.
Making sure that the print bed is level is one of the key considerations when you work with a 3D printer. You can do this manually, or you can rely on a printer’s automatic leveling capabilities to do the job for you.
Auto leveling uses sensors attached to the print head to check several points on the bed. It will then send this information to the printer’s computer so that it could adjust the nozzles as it works.
As such, it makes your life a whole lot easier, and your 3D printing jobs a whole lot faster. It’s also a must for beginners who may not have an idea on how to level the printing beds.
A Cartesian-style printer uses the Cartesian coordinate system. A Cartesian printer moves linearly on both X and Y axes. They can move:
– Up and down
– Front to back
– Left to right
Cartesian printers can have moving parts that are inordinately heavy and can shake your printer strongly enough to dislodge prints from the bed. It can sometimes lead to inaccurate prints.
It’s also close to impossible for Cartesian printers to change directions in an instant. However, Cartesian printers do shine with horizontal prints and are easier to understand. It’s also user friendly and cheaper than Delta printers in general.
Delta printers, for its part, have three arms that can go from one point to another but also change the angles as it moves. Delta printers are much lighter than Cartesian mechanisms, which helps make it responsive to changes in angles and directions.
Delta printers use fewer parts, so there’s less chance that it will break down, but it takes up too much space as well. Delta printers are also more lightweight than a similar Cartesian printer and it’s very easy to upgrade or maintain. It also allows for fast and accurate printing.
Should You Buy the Anycubic Predator?
For its price, the Anycubic Predator is surprisingly an excellent printer that delivers finely detailed prints and has a huge build size. You can use this 3D printer for bigger models. It’s very stable and the construction is solid.
There are competitors for the Anycubic Predator, but it wins in one way or another that makes this printer very easy to recommend. For instance, the Sidewinder X1 can give the Predator a run for its money, but it doesn’t have automatic bed leveling.
The Qidi Tech X Plus is better suited for semi-professional print jobs, but it’s more expensive than the Predator and has a smaller build volume. Meanwhile, the Geeetech A20M has a more affordable price tag, but also a smaller build volume.
Further Reading on Anycubic 3D Printers & Competitors:
Predator reviews anycubic
Entering the room, I immediately saw him. Tanned, pumped up…. mmmm…. the limit of my dreams. Stop, behave yourself, I reined in myself.HUGE Anycubic Predator 3D Printer Review - Unbox+Assemble+Test
As the girl's body descends millimeter by millimeter, her anus is pushed deeper and deeper onto a thick dildo, which was already out of her size, and now generally. Makes her feel as if her anus is tearing from the inside. The girl's breasts are as pulled up as none of her men pulled them during sex.
With her hips. After a while, the hips relaxed and I, having raised myself, sent my penis into the vagina, as promised, gently entered halfway and. Stopped. Tanya arched in an arc and moaned again.