Caterpillar 14 grader

Caterpillar 14 grader DEFAULT

100% Bonus Depreciation on New and Used Equipment*

Engine

Base Power (1st Gear) - Net

Engine Model

Speed at Rated Power

Emissions

Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent

Maximum Torque (VHP Plus)

1137.00 lbf-ft

1542.00 N·m

Maximum Altitude at Full Power

Maximum Altitude at Full Power (Tier 3)

Maximum Altitude at Full Power (Tier 2)

Standard – Fan Speed: Minimum

Standard Capability

Displacement

Note

Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.

Standard - Fan Speed - Maximum

Standard - Fan Speed - Minimum

Note

Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)

Weights

Operating Weight - Typically Equipped

Gross Vehicle Weight – Base* – Total

Gross Vehicle Weight – Base* – Front Axle

Gross Vehicle Weight – Base* – Rear Axle

Gross Vehicle Weight – Typically Equipped – Total

Gross Vehicle Weight – Typically Equipped – Front Axle

Gross Vehicle Weight – Typically Equipped – Rear Axle

Moldboard

Blade Width

Blade Width with End Bits

Blade Width without End Bits

Arc Radius

Throat Clearance

Arc Radius

Throat Clearance

Frame

Circle – Outer Diameter

Front Axle – Wheel Lean, Left/Right

Front Axle – Total Oscillation per Side

Blade Range

Circle Centershift - Right

Circle Centershift - Left

Moldboard Sideshift - Right

Moldboard Sideshift - Left

Blade Tip Range – Forward

Blade Tip Range - Forward

Blade Tip Range - Backward

Maximum Shoulder Reach Outside of Tires - Right

Maximum Shoulder Reach Outside of Tires - Left

Maximum Depth of Cut

Weights

Note

*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

Engine

Note

Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Standard – Fan Speed: Maximum

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Engine

Emissions

Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent

Maximum Altitude - Full Power

Maximum Altitude - Full Power (Tier 2)

Maximum Altitude - Full Power (Tier 3)

Maximum Torque - VHP Plus

1137.00 lb/ft

1542.00 N·m

Note (1)

Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.

Note (2)

Optimized VHP Plus is standard for the 14M3.

Note (3)

Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.

Note (4)

Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)

Standard Capability

Displacement

Frame

Circle - Outer Diameter

Front Axle - Total Oscillation per Side

Front Axle - Wheel Lean - Left/Right

Moldboard

Blade Height - With Cutting Edge

Blade Height - Without Cutting Edge

Blade Width - With End Bits

Blade Width - Without End Bits

Blade Range

Maximum Lift Above Ground

Weights

Gross Vehicle Weight - Base* - Front Axle

Gross Vehicle Weight - Base* - Rear Axle

Gross Vehicle Weight - Base* - Total

Gross Vehicle Weight - Typically Equipped - Front Axle

Gross Vehicle Weight - Typically Equipped - Rear Axle

Gross Vehicle Weight - Typically Equipped - Total

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

Engine

Note (5)

Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Weights

Note

*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

Service Refill Capacities

Transmission and Differential

Diesel Exhaust Fluid Tank (Tier 4 Only)

Hydraulic System

Circle Drive

Cooling System

Fuel Tank

Features

TECHNOLOGY THAT GETS WORK DONE

  • Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
  • Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
  • Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
  • Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.

MOVE MORE, BURN LESS

  • Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
  • Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
  • Standard VHP Plus provides ideal amount of power in all gears.
  • Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.

MORE CONTROL AND EFFICIENCY

  • Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
  • Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
  • Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.

DESIGNED FOR OPERATORS

  • Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
  • Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
  • Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
  • Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.

BUILT-IN SAFETY FEATURES

  • Optional rear vision camera enhances sight to rear of machine.
  • Electrical disconnect and engine shutoff switches are ground level.
  • Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
  • Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
  • Optional seat belt indicator promotes safe operating habits.

SAVE MAINTENANCE TIME

  • Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
  • Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • OPERATOR ENVIRONMENT
    • Joystick, power adjustable armrests
    • Air conditioner with heater
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
    • Gauges, machine level
    • Message display
    • Joystick gear selection
    • Joystick hydraulic controls for implements, steering, transmission
    • Ladders, cab, left and right side
    • Lights, left and right side lights
    • Lights, night time cab, LED
    • Meter, hour, digital
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio ready, entertainment
    • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
    • Seat, mechanical suspension, cloth
    • Storage compartments
    • Throttle control, electronic
  • POWER TRAIN
    • Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
    • Articulation, automatic Return-to-Center
    • Air-to-Air After Cooler (ATAAC)
    • Auto Diff Lock
    • Brake wear indication
    • Brakes, oil disc, four-wheel, hydraulic
    • Consistent power to ground
    • Monitoring system
    • Clutch, circle drive slip
    • Differential, lock/unlock*
    • Drain, engine oil, ecology
    • Demand fan, hydraulic
    • Engine ECO Mode
    • Ether starting aid
    • Fuel tank, ground level
    • Fuel-water separator
    • Hydraulic demand fan
    • Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
    • Optimized VHP
    • Parking brake - multi disc, sealed, oil-cooled
    • Priming pump, fuel
    • Sediment drain, fuel tank
    • Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
    • Transmission, 8F/6R, power shift, direct drive
  • ELECTRICAL
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, HD, 1,125 CCA
    • Breaker panel
    • Electrical system, 24V*
    • Belt, serpentine, automatic tensioner
    • Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
    • Product Link
    • Starter, electric
    • Service lights, enclosure, rear, LED
  • SAFETY
    • Alarm, back up
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Lockout, hydraulic implement for roading
    • Operator Not Present Monitoring system
    • Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
    • Seat belt, retractable 76 mm (3 in)
    • Secondary steering
    • Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • OPERATOR ENVIRONMENT
    • Air horn
    • Heated door
    • Mirrors high visibility
    • Mirrors, outside heated 24V
    • Mirrors, outside mounted
    • Seat, heated
    • Seat, heated/ventilated
    • Rearview camera
    • Seat belt indicator
  • POWER TRAIN
    • Transmission, autoshift
    • Engine, compression brake
  • TECHNOLOGY
    • Cat GRADE with Cross Slope
    • Stable Blade
    • Advanced Control Joysticks
    • Auto Articulation
  • GUARDS
    • Debris guard
    • Front axle cylinder guards
    • Rear fenders
    • Sound suppression, engine enclosure and transmission
    • Transmission guard
    • Accumulators, blade lift
    • Fast fill fuel, 378.5 L/min (100 gal/min)
    • Metallic DCM wear strips
  • ELECTRICAL
    • Light, LED, warning strobe
    • Lights, front headlights high
    • Lights, front headlights low
    • Mounting, for warning light
    • Working lights halogen
    • Working lights LED
  • SAFETY
    • Additional rearview camera and monitor
    • Machine security system key
  • OTHER ATTACHMENTS
    • Moldboard, 4.9 m (16 ft)
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
    • Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
    • Product Link satellite, cellular
    • Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
    • Snow wing, mounting frame ready
    • Fast fill
  • WORK TOOLS/G.E.T.
    • 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
    • Push block, counterweight
    • Ripper, rear
    • Tooth, ripper
  • FLUIDS
    • Coolant, -51 degrees C (-60 degrees F)
Sours: https://www.petersoncat.com/products/new/m-series-motor-graders-motor-graders/14m3

Item Description (Last Updated: Aug 31, 2017)

1959 Caterpillar 14 Motor Grader, 318 Turbo 6 Cylinder Diesel Engine, 6 Speed Manual Transmission, 14' Moldboard, 13.00-24 Tires, AC Does NOT Work, Battery Condition Is Unknown, SN: 64C301

Special Conditions

**Disclaimer: BigIron Does Not Guarantee Actual Hours/Miles; We Report What is Shown on the Meter at the Time of Listing.**

Disclaimer

This Item was not Functionally Tested and no guarantees on condition or operability are made by BigIron. It is the bidder’s responsibility to inspect the item, prior to bidding, and make their own assessment as to the item’s condition and suitability for use. Everything is Sold 'As Is, Where Is.’ BigIron is not responsible for any statements about the item made by the Seller.

Location

Location
Oklahoma
Loading Dock
No
Loading Assistance
Yes - Please Call At Least 24 Hours In Advance
Sours: https://www.bigiron.com/Lots/1959Caterpillar14MotorGrader
  1. Vintage car miniature
  2. Ocean eggs pets
  3. 350z hr intakes
  4. Ram drivers corsair
  5. Steam dirt

caterpillar-14m3-motor-grader-2

With power, balance, steering, service interval and fuel efficiency boosts along with a fully scalable factory integrated semi-automatic cross sloping system, Caterpillar’s new 14M3 represents a major upgrade over previous models.

screen-shot-2016-09-22-at-4-01-28-pmFirst, Cat has replaced the C11 engine found in previous models with a C13 ACERT with a net power range of 238-235 horsepower. The 14M3 comes standard with a variable horsepower system that matches power requirements in all gears. This is complemented by a Consistent-Power-To-Ground feature that automatically changes engine power levels to compensate for cooling fan losses to ensure consistent power delivery in all temperatures and conditions.

The new engine also boosts fuel efficiency through an ECO mode that limits the engine’s high-idle speed to 1,750 rpm in working gears, while maintaining the machine’s power. Cat says these ECO mode savings can be enhanced even further “when working at high idle in light to moderate applications in gears 3R to 5F.”

The C13 is paired with an 8F/6R power-shift transmission with an electronic control system Cat says enhances gear-to-gear shifting by maintaining consistent torque flow and smoothing shift points. The 14M3 also benefits from a Shuttle-Shift feature than enables directional shifts without slowing engine speed or using the inching pedal.

An Autoshift system is an available option and allows the operator to program shift points for specific applications.

caterpillar-14m3-motor-grader-4

Consistent control

Operation on the 14M3 is further simplified through an engine-over-speed protection system that prevents downshifting at excessive speeds and a standard differential lock which disengages during turns and re-engages during straight travel to protect the powertrain.

Steering on the 14M3 is speed-sensitive, meaning it becomes less sensitive at higher speeds, while a secondary steering system engages automatically if required.

Meanwhile, a load-sensing hydraulic system and what Cat calls “Proportional Priority Pressure-Compensating” valves ensure consistent control on the 14M3 by balancing hydraulic flow through more responsive implements and the delivery of variable flow rates for the head and rod ends of the cylinders, respectively. This combination allows all implements to operate simultaneously with consistent speed at consistent engine speeds, Cat says.

Operators can choose from three blade modes–fine, normal and coarse—to match blade control to the application at hand. A Return-to-Center system automatically restores straight-frame travel from any articulation angle.

The machine also features blade float, allowing the entire blade to follow the contour of the ground as well as the ability to set the blade to follow a hard surface while the remaining cylinder is controlled manually. The 14M3 comes standard with a 14-foot moldboard and a 16-footer is an available option. Cat offers a range of cutting edges and bits, along with a three-shank ripper, scarifier, snow plow and snow-wing.

caterpillar-14m3-motor-grader-5

Operator assist

The 14M3 also features Cat’s factory integrated GRADE with Cross Slope system which allows operators to more easily maintain desired cross slope by giving the machine automatic control of one side of the blade. You can also opt to replace the standard joysticks on the 14M3 and pair the GRADE with Cross Slope system with the optional Cat Advanced Control Joysticks, which allow the operator to configure auxiliary hydraulic functions from the sticks themselves.

This new machine also benefits from the addition of two new technologies: Stable Grade and Auto Articulation. Cat says, “Stable Grade detects and reduces machine bounce during operation while Auto Articulation improves maneuverability and performance in tight working spaces and enhances operator comfort.”

caterpillar-14m3-motor-grader-3

Service interval boost

Cat says it has increased the service intervals on the 14M3 to 500 hours for oil changes and 2,000 hours on transmission and differential oil changes. Most routine maintenance points are accessible from the ground on this machine. Cat has also included wear indicators to allow for brake wear to be measured without removing brake pods.

As with all new Cat machines, the 14M3 can be remotely monitored using the Product Link telematics system which reports machine location, fuel usage, performance, fault codes and more data to the VisionLink web interface.

Sours: https://www.equipmentworld.com/equipment/article/14965852/caterpillars-new-14m3-is-a-better-motor-grader-in-just-about-every-way
Caterpillar 14M3 Motor Grader with Stable Blade and Auto Articulation

Eremin fucked longer than Vlasov, as he was younger. But even he could not hold out for long, jumped up, trying to delay the orgasm. Oleg put his hand on his shoulder: Well, how.

Grader caterpillar 14

While he was looking for a suitable pair, I dreamed of how this could happen. And my thoughts went far, worrying me more and more. Exciting in a good way.

How the controls work - Cat 14M with trmble dual GPS

But I was lucky. We fit together like no one else, no matter what side of life you take. Our sex was also wonderful, my temperamental girl was just waiting for the opportunity to be alone and try something new. Here we will talk about one such case.

Autumn passed, then winter; spring, having sent its messengers, Marta and April, put things in order on the streets of Moscow.

Similar news:

She shrugged it off, throwing my hand aside and getting to her feet on her own. And in general, so that more. Well, everyone, shut up. the captain barked from somewhere behind her. Follow me, salagi.



3734 3735 3736 3737 3738