Patriot recessed lighting

Patriot recessed lighting DEFAULT

Shopgoodwill

Please check the Seller Info tab for information regarding this seller.

Payments MUST BE RECEIVED WITHIN seven (7) DAYS from auction close.

Available Payment Methods:


Master Card Logo  Visa Card Logo  Discover Card Logo  American Express Card Logo
PayPal Credit Card Logo
PayPal Logo

This item cannot be shipped internationally.

Shipping Weight (as determined by ): 13 lbs.
Actual Weight: 11.75 lbs.
Handling Price: $2.99

Shipping Calculator

Enter the following shipping information:

Payment

Payments MUST BE RECEIVED WITHIN seven (7) DAYS from auction close.

Available Payment Methods:


Master Card Logo  Visa Card Logo  Discover Card Logo  American Express Card Logo
PayPal Credit Card Logo
PayPal Logo

Shipping

This item cannot be shipped internationally.

Shipping Weight (as determined by ): 13 lbs.
Actual Weight: 11.75 lbs.
Handling Price: $2.99

Shipping Calculator

Enter the following shipping information:

You May Also Like

Other Items From This Seller

Sours: https://www.shopgoodwill.com/Item/78465970

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or

switching off circuit breaker).

● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact

any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury

or death from electric shock.

CAUTION

● All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC).

Contact your municipal building department to learn about your local codes, permits and/or inspections.

● Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC. Consult a qualified electrician

before installation.

● Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use

a fixture in a two-wire system that is not grounded. If you are not sure your lighting system has a grounding means,

do not attempt to install this fixture. Contact a qualified, licensed electrician for information with regards to proper

grounding methods as required by the local electrical code in your area.

● This fixture is dimmable with a forward phase electronic dimmer. Dimmers tested to be compatible with this fixture are

the Lutron: DVWCL-153PH, MACL-153MH, SCL-153P, TGCL-153PH.

If you are unfamiliar with electrical installation, it is recommended to use a qualified electrician for your installation(s).

Page 1 of 3

200504

SAFETY INFORMATION

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

SKU Number: 349-1360

6" LED RECESSED LIGHT

Model Number: RS2781

PACKAGE CONTENTS

Sours: https://www.manualshelf.com/manual/patriot-lighting/rs2790/installation-instructions-english.html
  1. Doctor army reserve
  2. Homebrew grain
  3. Crossfit crossroads
  4. Avenir bicycle seats
  5. Air pedic 500

Recessed Lights?

Super Sport said:

I picked up 6 2-packs of 6" Patriot Lighting recessed lights at Menards when they had them for 99 cents after rebate. I have 12 individual lights for under $10. :bounce:I figured the price couldn't be beat, and that I would find some use for them.

I'm looking to finish my 2-stall this spring/summer, and am considering using the recessed lights in there. I'm a bit concerned however with how bright they will be versus florescent fixtures.

So I am interested in how many of you were faced with a similar decision and why you chose what you did. Also, pictures of installed recessed lights would be very helpful! All insight is greatly appreciated!

Click to expand...


I love recessed lighting, but I can never decide how to install each room - what lamp size to use, spacing, etc. I just upgraded my first floor living room and office, and found a great way - I picked the spacing I thought would work, and then printed circles the exact size of the trim on my printer. I used painters tape to stick them to the ceiling, which gave me a great idea of how they would look when installed.

In a garage, I think recessed lights would be nice for accent but I think fluorescent will be your primary project light source. I would space the recessed around the perimeter (I'd plan on about 5' from the walls with a 6" can), and then fill the center with fluorescent.

 

Sours: https://www.garagejournal.com/forum/threads/recessed-lights.128022/
Installation LED Flat Panel Retrofit

Installing recessed lighting is one of the best ways to update and brighten a room. We added four new recessed lights in the kitchen during the remodel and it made such a difference!

Here’s the before:

How to Paint Kitchen Cabinets

And the after:

Extend Kitchen Cabinets to the Ceiling

This post contains affiliate links. If you make a purchase from one of the links, I may make a small commission at NO EXTRA COST to you. This helps keep the tutorials and plans free here at Bitterroot DIY. Thank you for your support! See my full disclosure here.

That picture is totally un-staged and the kitchen is incomplete, but you can really see the difference in lighting!

And the good news?

Once you get the necessary electrical in place, installing the recessed lights is a breeze.

Tools & Supplies

We used existing construction lighting since this was a remodel. Use new construction lighting if you’re in the process of building. I added links to both new and existing construction for your convenience. If you use the lighting from the links above, you’ll need both the housing and the lights.

We found a great deal at Menards on recessed lights from Patriot Lighting (not an affiliate link). They install without the recessed housing and just clamp onto the drywall. I highly recommend them – super easy to wire and install. This tutorial is written specifically for that type since that’s what we used.

Step 1.

Mark the location for the new recessed lighting. The recessed lights will include a template that you can cut out and tape to the ceiling to mark them out. We added four new lights as you can see below.

Make sure to have a licensed electrician add any necessary new electrical for the recessed lighting. TURN OFF all electricity before connecting the new can lights.

How to Install Recessed Lighting

The half-patched hole in the center of the ceiling is where the original kitchen light was located. We patched that up and added the can lighting equally spaced around that section of the ceiling.

Step 2.

Trace the template rounds and cut the drywall with a drywall saw.

How to Install Recessed Lighting

We just used a simple jab saw, but they also make hole saws specifically for installing can lighting. Either one works great.

How to Install Recessed Lighting

Step 3.

Remove the back of the recessed light to access the wiring.

How to Install Recessed Lighting

Remove one of the knock-out round metal plates. This is where you’ll pull the wires through.

How to Install Recessed Lighting

Here’s what it looks like with the whole back removed:

How to Install Recessed Lighting

Insert the Romex connector and attach with a hex nut from the back. The recessed light from Menards does not include the connector, but they’re located in the electrical section and are really cheap.

How to Install Recessed Lighting

Step 4.

Once you’ve got the connector in place, pull the new electrical through the connector and tighten it down (just tight enough to hold it in place).

Again, make sure the electrical is turned off before handling any wires.

How to Install Recessed Lighting

Another view:

How to Install Recessed Lighting

Step 5.

Wire the new recessed light to the existing electrical.

How to Install Recessed Lighting

Once the wires are securely connected, tuck the wires into the box and fasten the fixture.

How to Install Recessed Lighting

Step 6.

Push the drywall flaps up and insert the light into place.

How to Install Recessed Lighting

The flaps on the side are spring loaded and will clamp down onto the ceiling drywall to hold it in place.

How to Install Recessed Lighting

These recessed lights were so quick and easy to install. As I said before, I highly recommend them if you’re planning to add recessed lighting to existing construction. There’s no need to spend much time in the attic and no hassle with finding a stud to attach the housing to.

If you decide to go with standard recessed lights and housings, there’s a great tutorial from Brittany at Pretty Handy Girl.

Extend Kitchen Cabinets to the Ceiling

Last but not least, turn the power back on and try out your new lights!

Please let me know if you have any questions and I’ll get back to you as soon as possible!

Bitterroot DIY

Thanks for stopping by!

For more project ideas, you can find me on Pinterest. And to stay up to date with the latest shenanigans, follow me on Instagram.

How to Install Recessed Lighting
Sours: https://www.bitterrootdiy.com/how-to-install-recessed-lighting/

Recessed lighting patriot

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or

switching off circuit breaker).

● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact

any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury

or death from electric shock.

CAUTION

● All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC).

Contact your municipal building department to learn about your local codes, permits and/or inspections.

● PATRIOT recessed fixtures are designed to meet the latest NEC and UL requirements. Before attempting installation

of any recessed lighting fixture, check your local electrical code. This code sets the wiring standards for your locality

and should be carefully studied before starting to work.

● Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC. Consult a qualified electrician

before installation.

● Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use

a fixture in a two-wire system that is not grounded. If you are not sure your lighting system has a grounding means,

do not attempt to install this fixture. Contact a qualified, licensed electrician for information with regards to proper

grounding methods as required by the local electrical code in your area.

● If you are unfamiliar with electrical installation, it is recommended to use a qualified electrician for your installation(s).

Page 1 of 4

200325

SAFETY INFORMATION

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

SKU Number: 349-2921

6" 4PK RECESSED LIGHT HOUSING

WITH BAFFLE TRIM

Model Number: RS2793

PACKAGE CONTENTS

Sours: https://www.manualshelf.com/manual/patriot-lighting/rs2793/installation-instructions-english.html
Patriot Lighting Galie 7” Flush Mount from Menards Installing Ceiling Light with a Wall Switch

I shouted - yes. I'm here. A man entered my apartment, with a machine gun, in camouflage, with a mask on his face, well, as in the movies they show. Special forces, he looked at me, and I stood in front of him, wearing what my mother gave birth to.

Now discussing:

We drank a bottle of wine at lunch. Then we moved into the room and began to communicate. Everything was going well for us, and at some point we both decided to kiss. Our kiss turned out to be very passionate. I did not even expect this, but after the kiss we looked at each other and slowly began to undress each other.



3503 3504 3505 3506 3507