Archangel cqb stock

Archangel cqb stock DEFAULT

Archangel Adjustable Precision Rifle Stock M14, M1A Synthetic

Product Overview

The ProMag Archangel M1A precision rifle stock is a fully adjustable synthetic stock. Constructed of lightweight and durable carbon reinforced polymer. The stock features a thumb wheel adjustable cheek riser. The length of pull is adjustable from 13-5/8" to 14-13/16". The stock features 4 quick detach push-button sling swivel mounts, two on the right side and two on the left side of the stock and two standard QD sling swivels on the bottom of the stock. The pistol grip features a storage compartment and the forend has an integrated picatinny accessory rail.

Archangel logo
Made In
warning-iconWARNING:

Specifications

Was the information on this page helpful?

Community Q&A

Customer Reviews

NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.
Sours: https://www.midwayusa.com/product/3357190306

An M1A for CQB?

By On Target

When I was a kid I lusted for an M1 Garand, the iconic American battle rifle of World War II and the Korean War. From an early age I was regaled with stories of U. S. Army and Marine Corps combat veterans who carried Garands and raved about their power, reliability and accuracy. One of them — my Assistant Scout Master — was a Marine with the 1st Marine Division who retreated from the Battle of Chosin Reservoir. He told of .30 caliber machine guns and Tommy Guns that froze solid, but his M1 never skipped a beat. It literally saved his life on countless occasions.

When I turned 16 my father told me I could buy a Garand (with my own money, of course), and I found one made by the Springfield Armory — the government armory in Massachusetts where John Garand was employed, and where he developed the M1. The rifle was in pristine condition, and surplus .30-06 ammo was still cheap and plentiful, so I shot it a lot. I probably put 5,000 rounds through that rifle, without a single malfunction I can remember.

The M1 Garand was limited as a battle rifle by its semi-auto-only operating system and 8-round en bloc clip. The M14, adopted as the standard U. S. service rifle in 1959, is basically a “fully evolved” M1 with a selective-fire operating system and 20-round detachable box magazine, and firing the shorter 7.62 NATO (.308 Win.) cartridge. It proved difficult for most troops to control in full-auto fire, and was replaced by the 5.56 NATO chambered M16 in 1970.

The “civilian version” of the M14 is the M1A, a semi-auto-only clone with the same 20-round detachable box magazine. It’s been made in seemingly countless model variations by the “other” Springfield Armory, a private company located in Geneseo, Illinois since its inception in 1974. In fact, Springfield Armory was founded to produce the M1A, which was its first product. The company’s latest iteration — the M1A SOCOM 16 CQB — is the subject of this review.

As its CQB (Close Quarters Battle) name implies, the SOCOM 16 CQB is fully modernized variation of the M1A intended for serious defensive use. With an overall length of 35 and 5/8 inches (with the buttstock collapsed), it’s nearly ten inches shorter than the standard M1A, while still offering the fight-stopping authority of its 7.62 NATO chambering.

The most striking visual feature of the SOCOM 16 CQB is its Archangel stock. This one-piece, full-length rifle stock incorporates a 5-position collapsible buttstock mounted on an integral, AR-type commercial-spec polymer buffer tube, so you have the option of installing any AR-compatible stock. An integral, 2-position raised comb increases comb height to a usable level for a variety of optics types. It also features a removable rubber butt pad, lever-type locking latch and a single, vertical, quick detach sling swivel receptacle in the heel. Four more QD sling swivel receptacle are provided on both sides of the stock, front and rear. The forearm has single, 2 and 3/4 inch M-Lok slots on both sides far forward and four 1 and 1/4 inch M-Lok slots along the bottom for mounting accessories. Both side M-Lok slots are fitted with composite three-slot Picatinny rail sections, while a composite seven-slot rail is installed in the middle two slots on the bottom. The handguard cover is cut out for an installed, 4 inch Picatinny rail section for mounting a long eye relief, scout-type magnifying optic or red-dot scope. An AK-style pistol grip creates the exact grip angle and distance desired between the hand and trigger, and can be replaced with any standard AK-style grip.

Sights consist of a dovetailed, drift adjustable (for windage only) front XS post with tritium insert, .125″ blade and protective ears, while the rear sight is a .135″ enlarged military aperture ghost ring that is adjustable for both windage and elevation. One of the two versions of the SOCOM 16 CQB comes with a Vortex Venom red-dot optic mounted in a Springfield Armory Clip Guide Red Dot Mount, which is the one we received for testing.

The guts are pretty much identical to those of Springfield Armory’s M1A SOCOM 16, introduced in 2004. Chambered in 7.62 NATO only, the CQB is fitted with a 16 and 1/4 inch Parkerized carbon steel barrel with six-grove rifling cut at a right-hand twist rate of one turn in 11 inches. The barrel is fitted with a proprietary muzzle brake that directs combustion gases upward, reducing felt recoil and keeping muzzle rise so flat that fast follow-up shots are a snap.

The balance of the components are straight SOCOM 16, with the same receiver, Garand-style bolt group, gas system and controls, including the outstanding trigger group for which the M1A has become justly famous.

Short-range function testing our M1A CQB immediately revealed one stand-out attribute — this is an extremely shootable .30-cal. battle rifle. The SOCOM 16 has always shown itself as a very controllable rifle under recoil, but the enhanced ergonomics afforded by the Archangel stock enhanced the SOCOM’s shooting experience to a measurable degree. Weapon manipulation during reloads was also quicker, more controlled and easier on the firing hand wrist, thanks to the more vertical angle of the stand-alone handgrip. As we’ve come to expect form Springfield’s M1A platform, reliability here was 100-percent…even with some 30-year-old, overseas-manufacturer 147-gr. 7.62x51mm military surplus ammo we had kicking around.

To see what level of precision the M1A CQB was capable of, we set up shop 50 yards away from our targets and began drilling three-shot groups. Normally this would be a 100 yard test, but lacking a magnified optic, we felt 50 yards was better suited to dialing out human error. We put a total of six different loads through the rifle, ranging from 150-gr. To 175-gr., from Black Hills, Hornady, Federal and Remington — all of which landed their best groups in under an inch. The star of the show, however, was Hornady’s 155-gr. Steel Match, steel-cased load. The Hornandy ammo/M1A CQB combo proved to be consistently steller performer, printing a best group of 0.65″ for three shots. Again, no malfunctions to report.

The new SOCOM 16 CQB comes packed in a custom ballistic nylon tactical case complete with internal supports, owners manual storage and pockets for up to three magazines. One 10-round magazine is included, and 20-round magazines are available optionally. See them at your firearms retailer, or contact Springfield Armory, Inc., Dept. OT; Tel.: (800) 680-6866; Web: www.springfield-armory.com.

Editor’s Note: This article was written by Bill Battles and shared with us by On Target Magazine.

Join the Discussion

Go to forum

Featured in this article
308WINM1A™ SOCOM 16 CQB

M1A™ SOCOM 16 CQB

Share
Facebook ShareTwitter SharePinterest Share
Did you enjoy this article?
88
Sours: https://www.thearmorylife.com/an-m1a-for-cqb/
  1. Download scanner driver
  2. Breast augmentation vancouver
  3. Gimbal mic
  4. Zotac 3080 oc
  5. Barnstable nh

Please Enable Your Browser's Cookies Functionality Cookies are not currently enabled in your browser, and due to this the functionality of our site will be severely restricted. Web browser based cookies allow us to customize our site for you, save items in your cart, and provide you with a great experience when shopping OpticsPlanet. Your privacy is important to us, and any personal information you supply to us is kept strictly confidential.
If you cannot enable cookies in your browser, please contact us — we are always here to help!

JavaScript is blocked by AdBlocker or ScriptBlocker We're sorry - it looks like some elements of OpticsPlanet are being disabled by your AdBlocker. Unfortunately we are unable to offer our excellent shopping experience without JavaScript. Please add "opticsplanet.com" and "https://opl.0ps.us/assets-c1e0f7f3710/" to whitelist, or disable AdBlocker for this site (please note that we do NOT feature any annoying ads on this website). Thanks!

Government Export Restriction

Color: Black Fabric/Material: Polymer Gun Model: Springfield Armory M1A Weight: 2.8 lb

Code: KA0-RK-AM1ACQS-AACQS

MPN: AACQS

UPC: 708279014338

Free shipping* & free returns*

Outfit your M1A or M14 rifle with this lightweight ProMag Archangel M1A Close Quarters Stock crafted from rugged polymer. ProMag developed these Rifle Stocks with an anti-snag rubber recoil pad to reduce felt recoil, helping you land more accurate shots with ease. This ProMag Archangel M1A Close Quarters Rifle Stock has a pistol grip with locking storage compartment so that you can firmly grasp your weapon and have extra space to store batteries and other small components. The buttstock is collapsible and adjustable to 6 different positions to best suit your body and shooting style. Install this feature-filled ProMag Archangel Springfield Armory M1A Close Quarters Stock to improve nearly every aspect of your weapon.

Specifications for ProMag Archangel M1A Close Quarters Stock:

Color:Black
Fabric/Material:Polymer
Gun Model:Springfield Armory M1A
Weight:2.8 lb
Attachment/Mount Type:QD Mount

Features of ProMag Archangel M1A Close Quarters Stock

  • Fits the Springfield Armory M1A and M14 rifles
  • Pistol grip with locking grip storage compartment
  • Additional storage compartment in buttstock extension
  • Streamlined, collapsible six (6) position buttstock with a 11.5"-14.5" length of pull
  • Anti-snag rubber recoil pad
  • Removable cheek riser provides proper alignment when used with optical type sights
  • Incorporates five (5) integral steel inserts for QD sling swivels (QD swivels not included)
  • Constructed of our legendary high strength, carbon fiber and glass reinforced black polymer
  • Precision fit inlet provides the utmost in accuracy potential
  • Grip is interchangeable with any AK-47 type grip
  • Buttstock is interchangeable with any AR-15 type carbine buttstock that will fit a six (6) position, commercial size buffer tube.

Package Contents:

  • ProMag Archangel M1A Close Quarters Stock

Customer Reviews

Helpful Positive Review Don’t believe the gunflakes by LongshotMcgee, November 8, 2020

I was hesitant at first because I believed the reviews that said it was a phony... this is NOT! I bought one for my SOCOM 16, now I’m buying one for my full sized M1A. I can’t afford a SAGE, this will definitely compare if I ever can. It’s not “co...
Read More...

2/2 found this helpful
Helpful Negative Review Lesser quality than I expected by John Trimaine, September 5, 2020

Disappointed. I was trying to save weight. A battle rifle like an M1A needs something more sturdy. The thing could never be effective for a butt to a jaw bone....i went back to my original stock. I would like to send it back...

2/11 found this helpful
Most Recent Reviews CQB M1A Stock by MO, August 18, 2021

Stock is awesome, perfect fit for my National Match S.S. barrel. Did not like AA125 Magpul collapsible stock that came with, rubber pad does not stay on very well (bad design). Replaced it with Magpul Archangel AA120 heavy duty stock, rubber pad is t...
Read More...

1/1 found this helpful
Most Recent Reviews Great Stock by B1buddy, June 19, 2021

M1A plastic stock? Naw, not me! Well, this one fit really as tight as a match bedded wood stock. I pulled off a nasty looking fiber glass stock so naturally this one looks better. It is light weight compared to other stocks I have tried and that w...
Read More...

Most Recent Reviews nice setup! by Jay, Verified Owner, March 23, 2021

This stock is very easy to install and figment is great and it also helps the looks a lot! I would for sure recommend to someone looking to upgrade or purchase a CQB rifle. Jay really likes it too but ya know he is a super fan so you shouldn’t take h...
Read More...

Read All 11 Reviews
Sours: https://www.opticsplanet.com/promag-archangel-m1a-close-quarters-stock.html
NEW M1A SOCOM 16 - REVIEW

I can't understand what the happiness of freedom is. Candles are waxed on my body. And they are melted thickly.

Stock archangel cqb

And which one. "Olya, barely holding back tears:" I'm pregnant. "Denis happily:" You're kidding !!.

ARCHANGEL M1A Rifle Stock Installation

She tried to escape. He turns him on again. He threw her back and clung to the labia cam.

You will also like:

Starting to move, it became even more pleasant for me. Anya waved me as best she could. Having fucked her in this position for 5-10 minutes, I took out my penis, red from tension, I said: - "Take it in your.



1191 1192 1193 1194 1195