Z400 accessories

Z400 accessories DEFAULT

Various Device Accessories and Supplies

HP Z400

Accessories and Supplies for this Device

Service




HP Care Pack - 1 Year - Service - 9 x 5 - On-site - Maintenance - Parts & Labor - Physical

Manuf Part# U4867PE | U4867PE


HP Care Pack - 3 Year - Service - 9 x 5 Next Business Day - On-site - Maintenance - Electronic and Physical

Manuf Part# UE379E


HP Care Pack - 4 Year - Service - 9 x 5 Next Business Day - On-site - Maintenance - Parts & Labor - Physical

Manuf Part# UE333E


HP Care Pack - 5 Year - Service - 13 x 5 - On-site - Maintenance - Parts & Labor - Physical

Manuf Part# U7940E


HP Care Pack - 5 Year - Service - 9 x 5 Next Business Day - On-site - Maintenance - Parts & Labor - Physical

Manuf Part# UF239E


HP Care Pack - 5 Year - Service - 9 x 5 Next Business Day - On-site - Maintenance - Parts & Labor - Physical

Manuf Part# UE334E


HP Care Pack Hardware Support - 3 Year Extended Service - Service - 9 x 5 Next Business Day - On-site - Maintenance - Parts & La

Manuf Part# U1G59E


HP Care Pack Hardware Support with Accidental Damage Protection - 5 Year Extended Service - Service - 9 x 5 Next Business Day -

Manuf Part# U1G62E


HP Care Pack Hardware Support with Defective Media Retention - 3 Year - Service - 13 x 5 x 4 Hour - On-site - Maintenance - Part

Manuf Part# UL839E


HP Care Pack Hardware Support with Defective Media Retention - 3 Year - Service - 24 x 7 x 4 Hour - On-site - Maintenance - Part

Manuf Part# UK775E


HP Care Pack Hardware Support with Defective Media Retention - 3 Year Extended Service - Service - 9 x 5 Next Business Day - On-

Manuf Part# U1G55E


HP Care Pack Hardware Support with Defective Media Retention - 4 Year Extended Service - Service - 9 x 5 Next Business Day - On-

Manuf Part# U1G56E


HP Care Pack Hardware Support with Defective Media Retention - 5 Year - Service - 13 x 5 x 4 Hour - On-site - Maintenance - Part

Manuf Part# UL841E


HP Care Pack Hardware Support with Defective Media Retention - 5 Year Extended Service - Service - 9 x 5 Next Business Day - On-

Manuf Part# U1G57E


HP Care Pack Hardware Support with Disk Retention - 3 Year - Service - Next Business Day - On-site - Maintenance - Parts & Labor

Manuf Part# UE332E


HP Care Pack Hardware Support with Disk Retention - 4 Year - Service - Next Business Day - On-site - Maintenance - Parts & Labor

Manuf Part# UE343E | UE343E


HP Care Pack Hardware Support with Disk Retention - 5 Year - Service - Next Business Day - On-site - Maintenance - Parts & Labor

Manuf Part# UE344E


HP Care Pack Same Business Day Hardware Support - 5 Year Extended Service - Service - 13 x 5 x 4 Hour - On-site - Maintenance -

Manuf Part# U1G35E


HP Care Pack Same Business Day Hardware Support with Defective Media Retention - 3 Year Extended Service - Service - 13 x 5 x 4

Manuf Part# U1G85E


HP Care Pack Same Business Day Hardware Support with Defective Media Retention - 5 Year Extended Service - Service - 13 x 5 x 4

Manuf Part# U1G87E

Here are some more products that support this device.

Sours: https://www.provantage.com/HP_Z400_Various-Accessories.htm

 

puig

BRAKE-CLUTCH FLUID TANK CAP

Windshield New Generation Sport

Renew the image of your bike with the New Generation Sport from Puig. Manufactured in 3mm methacrylate, material that guarantees high resistance to possible impacts and provides a great aerodynamic capacity, being insurmountable against the wind.

The product has been tested in the wind tunnel, achieving the best results, therefore, Puig provides this study with the majority of the pieces.
Puig has taken into account the diversity of this style of motorcycle and has a model for each of the most current motorcycles. In addition, for the piece to perfectly adapt to the aesthetic line of the motorcycle, Puig has available a wide variety of colors of carenabris to choose.

The assembly of the piece is an easy task and fits perfectly to the machine. To facilitate the assembly, Puig serves together with the fairing instructions for coupling.

Check if the part number is homologated by the German KBA and if it is already included in the homologation in the DOCUMENTS section.

Windshield Mito

Improve the riding of your motorcycle and give it greater safety with the new Mito windshield from Puig. Thanks to its sober lines, its modernized classic character will give your vehicle more personality, being adaptable to motorcycles with round headlights.

Designed and manufactured in Barcelona, the new windshield is made of 3mm high impact acrylic material, UV resistant. Its total measurements are 285mm wide by 320mm high. In addition, it has rounded edges of Ø4mm, a fact that makes it comply with the strictest European safety regulations.

The piece is available in clear, smoked, dark smoked, black, blue, red, green and orange finishes.

The Mito windshield has universally assembly, although it may require adjustments depending on the model.

It offers the option of mounting to the handlebar with flanges or, with slides on the fork.

Windshield Trend

This universal fairing will significantly improve aerodynamics, protecting the rider from the wind without having to give up on the design of your motorcycle. The Trend model for headlights which are not round is manufactured in polycarbonate of 3 millimeters, always prevailing quality and offering a plus in security against objects impacts. This product has a ABE approval certificate 38188.

Its geometry is indicated for non-round headlights and, as usual in Puig, its assembly is a matter of a few minutes thanks to the fixing kit and the instructions included in the package. Depending on the model, an extra mounting kit is used to better fasten the fairing to the front.

Windshield Trend With Visor

Improve the aerodynamics and protect yourself against the wind with the Trend windshield with the Puig visor.

Made of 3mm polycarbonate and smoked finish, it will be your best weapon against wind gusts during riding and aerodynamic improvement of the motorcycle. In addition, your multi-adjustable visor will complete the protection margin. This complement is fixed to the fairing with screws.
As for the assembly, it is an easy part to attach to the motorcycle and comes with very visual instructions, so you can enjoy your fairing in a few minutes.

The Puig windshield has the German approval certificate ABE 38007.

Windshield Bat

Renew the image of your motorcycle and protect yourself against possible inclement weather during the ride with the new universal Bat windshield from Puig.

Manufactured in 3mm polycarbonate, material with great resistance to possible impacts and impeccable behaviour against the wind, will give your bike a greater aerodynamic capacity while enhancing its aesthetic line with a new more aggressive and sporty look. The clamping of the fairing will be excellent thanks to its two clamping points.

The installation of the piece is very easy and comes with a complete kit. For those models that need it, an extra mounting kit is available.

The part includes an ABE approval certificate 38188 and TÜV.

Windshield Rafale

Give your bike a more aggressive and sporty touch with this universal RAFALE gear from PUIG. Specially designed for NAKED motorcycle models, it allows to improve aerodynamics and protects the rider against the wind.

Manufactured in 3mm PMMA (Polymethylmethacrylate), material highly resistant to impacts, it makes the wheelbarrow the ideal protection element for your NAKED. It is a product that has ABE approval certificate 38188.
 
As for the assembly, PUIG includes a kit with mounting instructions, very visual, to facilitate its placement on your motorcycle and to enjoy the new fairing in minutes. The piece has two attachment points.
For some specific models, the Catalan brand serves an additional mounting kit to attach the fairing to your motorcycle.

Windshield Flanker

Improves the aerodynamics of your motorcycle, maintaining its sporty and modern character, with the Flanker windshield. This minimalist windscreen fits in with the sharp and forceful lines of the new motorcycles, a design language that will combine most naked models on the market today.

Rear Fender extension

Add extra protection to your motorcycle with a Puig rear fender extension. It’s made of ABS material, highly resistant to any type of impact and painted in matt black to preserve the motorcycle’s look.

The assembly of the fender extension takes place over the original motorcycle’s fender and it’s attached by screws supplied by Puig. To attach the fender extension, it is necessary to drill holes on the original part.
Puig allows you to download a document from the following link with useful tips to facilitate the assembly of the fender extension.

Front fender extension

Give more protection to your motorcycle with the front fender extension from PUIG. The extension is made of ABS material which is highly resistant to impacts, it will be the ideal protection to prevent debris coming from the front wheel and impacting the body of your motorcycle or directly against you. The extension comes in black finish to match the look of your motorcycle.
PUIG, has a specific extesion for the most popular motorcycles models on the market: for naked, type R, crosstourer, etc.

For its installation, PUIG provides rivets to install the fender extension to ensure a permanent attachment to the motorcycle's original mudguard. Only for  reference 9203N - it is offered with glue for its installation.
Together with the part and in order to facilitate its assembly, PUIG provides tips to facilitate the placement of the part to your motorcycle.

Engine Spoilers

Protect one of the most sensitive parts of your bike with Puig engine spoilers.

Designed and manufactured in Barcelona, the Puig engine spoilers adjust perfectly to the lines and volumes of your motorcycle. Tested in the virtual wind tunnel to achieve a more aerodynamic volume and improvement in stability while riding, they protect the lower area of your bike from possible impacts, dirt, etc.

Manufactured with the highest technologies, its components are made of aluminum and/or ABS materials that are highly resistant to impacts and UV rays, in turn they are light and durable. The plastic parts have a built-in surface treatment that improves the behavior against chemical agents and in turn also offers total protection against UV rays. This layer avoids the need to have to paint the engine spoiler. The metal supports are made of 2mm metal, with anti-corrosion treatment, resistant and easy to install.

In addition to protecting the motorcycle, Puig engine spoilers are designed to give your bike a more sporty character, so most models come with a sticker kit to customize them. You can find these engine spoilers in two finishes: black or carbon-like.

The instalation is easy and fast following the step by step instructions in paper format and / or video tutorial.

If your motorcycle has OEM or aftermarket accessories such as exhaust pipes, fenders, etc., ask us about the possible interference of these with the Puig engine spoilers and we will inform you.

R19 Frame Sliders

Add protection and safety to your motorcycle with Puig’s R19 Frame sliders. These protectors guarantee integral protection of the chassis and engine of your motorcycle, as well as providing additional protection to your knees with the included rubber endings.
The carefully designed pucks made of Nylon will fit perfectly with the looks of your bike, as it does not extend from the handlebar and touch before the footrests.

The sliders are offered with gray rubber by default, but Puig has a wide variety of colors available to fit your motorcycle’s look. In addition to the rubber spare parts, Puig also offers spare parts for Nylon sliders portion.

It should be noted that each protector is manufactured for a specific motorcycle model.

Assembly is very easy and the part comes with an instruction booklet, so you can quickly enjoy the slider.

License Plate Holder

Replace the original license plate holder of your motorcycle with the Puig license plate holder. Its elevated location gives a Racing character to your motorcycle. The set combines pieces of steel finished in epoxy paint with pieces in Polyamide, achieving an important reduction of weight with respect to the original support.

Some of the supports have the option of being fixed or adjustable according to the reference that adheres to each motorcycle.
The support comes with space for the indicators, remember that it is not suitable for the originals, and is adjustable up to 3 cm. Note that the support is not served with intermittent, they must be purchased separately. Another point to keep in mind is that connectors are not used to connect the license plate light.

The assembly of the piece is very simple and comes with instructions.

Support for Original Turn Light

Cover the space under the original rear turn signal with the PUIG turn signal holder. With this support, you can improve the image of your motorcycle and mount the Puig license plate without having to modify the original indicator of the motorcycle.
This piece is made of steel and finished in EPOXI paint in black color.

Levers 2.0

It is the evolution from version 1.0. PUIG has emphasized on the ergonomic improvement of the piece and improved the look of the levers to bring a more modern and aggressive touch to the bike.

The new shape of the levers allows for a perfect handle, fact that will guarantee greater grip and accessibility, making the riding experience of your motorcycle more unique.

Regarding the looks, PUIG has renewed all the graphics that are included in the piece adapting them to the new times and you are also able to choose the part among 7 different colors.

The 2.0 PUIG handles are available in 4 different models: Folding, fixed, short and extendable folding. PUIG has focused his improvement efforts on this latest model, where it has managed to modify the ergonomics to ensure that the fingers will work comfortably.

As for the assembly of these, the levers are delivered with detailed instructions and do not require modification of the motorcycle. In case it is the first time that a set of handles is purchased, you must also buy the set of specific fittings for your motorcycle, since the Puig handles are not assembled with the original fittings. The assembly of the fittings must be carried out by a specialized mechanic, since before circulating, due to modifications in the models of the brake pump, the wheel must be raised with a trestle to check that the wheel is not braked. If it is braked, it can cause the brakes to lock.

Puig 2.0 handles have the TÜV certificate and has the German approval ABE 91294.

Levers 3.0.

Renew the levers of your motorcycle with the new PUIG 3.0 levers. It is the evolution from version 2.0. PUIG has emphasized on the ergonomic improvement of the piece and improved the look of the levers to bring a more modern and aggressive touch to the bike.

The new shape of the levers allows for a perfect handle, fact that will guarantee greater grip and accessibility, making the riding experience of your motorcycle more unique.

Regarding the new looks, PUIG has renewed all the graphics that are included in the piece adapting them to the new times and you are also able to choose the part among 7 different colors.

The 3.0 PUIG handles are available in 4 different models: Folding, fixed, short and extendable folding. PUIG has focused his improvement efforts on this latest model, where it has managed to modify the ergonomics to ensure that the fingers will work comfortably.

As for the assembly of these, the levers are delivered with detailed instructions and do not require modification of the motorcycle. In case it is the first time that a set of handles is purchased, you must also buy the set of specific fittings for your motorcycle, since the Puig handles are not assembled with the original fittings. The assembly of the fittings must be carried out by a specialized mechanic, since before circulating, due to modifications in the models of the brake pump, the wheel must be raised with a trestle to check that the wheel is not braked. If it is braked, it can cause the brakes to lock.

Puig 3.0 handles have the TÜV certificate and has the German approval ABE 91294.

In order to get a full set, it is required to purchase brake lever, brake fixation, clutch lever and clutch fixation.

Brake Lever Protector

The brake lever protector is born from the need to avoid accidental contact with other riders, avoiding the brake actuation and subsequent fall.

Through its design, Puig has prioritized the protection and integration of the protector in the set. A two-way adjustable system for the protector, longitudinal and perpendicular to the grip, has been accomplished.

Aesthetically,the arrow shape of this part’s endingis a highlight that provides dynamism and allows you to customize and match the set with the color of your bike’s other components.

It is manufactured by machining a billet aluminium block and is then anodized to provide protection and color.

There is a universal version that allows it to install on handlebars with an internal diameter of 13 to 18 mm without the need for an adapter, but we also have specific adapters for motorcycles that require it. The clutch-side counterweight is also available to unify the bike’s components.

Our brake/clutch lever guards are compatible with our Puig levers. We cannot guarantee that they are compatible with the original levers.

Clutch lever protector

Cover your clutch lever against any accidental contact and add the definitive racing touch to your motorbike with this protector derived directly from the experience in MotoGP and WorldSBK. A piece that came from the need to safeguard this essential element for the motorcycle and that, on occasions, can be activated in an unexpected way for the rider, putting him in danger and modifying his usual line.

The clutch lever protector derives from the creation of that same piece for the brake. An element that has become essential in competition motorcycles. With this piece, homologated for the street, Puig Hi-Tech Parts draws its knowledge as a collaborator of the leading teams in the queen categories. Thanks to that experience, we have developed an element that prioritizes the protection and integration of this piece into the original motorcycle as a whole. For this reason, a bidirectional adjustment system (longitudinal and perpendicular) of the protector with respect to the cuff has been developed.

Its manufacture is made from a machined block of high-performance aluminum, with subsequent anodizing to improve its protection and final finish. A process that improves the durability of the protector and allows a greater customization of the motorcycle, working together with the brake lever protector.

The universal version of the protector allows mounting it on handlebars with an inner diameter of 13 to 18 millimeters, without the need to purchase a separate adapter. To find out if your motorcycle needs specific adapters, consult our catalog / website.

Our brake/clutch lever guards are compatible with our Puig levers. We cannot guarantee that they are compatible with the original levers.

Racing Footpegs

The Puig racing footpegs are specially designed for R motorcycles and offer maximum grip to the rider and passenger. Its attractive sport design makes it the perfect complement for the most radical motorcycles, whose aesthetics receive an even more extreme touch.
They measure 72 mm long and 27 mm wide and their weight is only 90 gr. Ergonomics is a key factor in its design, which has been designed to increase its free height to the ground, allowing increased the angle of inclination of the motorcycle. They are adjustable in inclination and have marks that ensure greater precision in its assembly.

The racing footpegs provide riders great confidence in their riding, both in quiet riding and specially in the moments when the rider tries to find the limits on trackdays or races, when you need to have maximum sensitivity in all the components of the motorcycle.
They are produced in blue, black, gold, silver, red, orange and green, so that each biker can find them with the best match. For the assembly, parts of the original footpegs are used and for each motorcycle the rider and passenger fitting adapter must be purchased separately.

Puig racing footpegs have the TÜV certification and the ABE document.

Sport Footpegs

The Puig sport footpegs are ideal for personalizing the style of naked bikes. Its attractive design and made of anodized aluminum makes them stand out on the motorcycle, whose image improves on sport looks.

The sport footpegs measure 72 mm long and 27 mm wide and weigh only 90 gr.
Its ergonomic design increases its free height to the ground, which allows a greater angle of inclination of the motorcycle. They are adjustable in inclination and incorporate some markings to ensure the precision in their assembly.

They mount a rubber that improves the comfort and grip of both the driver and the passenger. Available in blue, black, gold, silver, red, orange and green, the user can find the matching footpegs, or in contrast, to the color of his motorcycle.

They have the TÜV certification and the ABE document.

Vintage Footpegs

The Vintage Footpegs by Puig have been designed to adapt naturally to retro-style motorcycles, both for the stock series and for the most personal preparations.

These footrests are manufactured starting from an aluminum block, on which an anodized finish is made and a rubber support is mounted to improve the grip of the boot and the isolation of vibrations.

In spite of its classic shapes, ergonomics have been taken into account in its design, with the inclined outer end to increase the ground clearance. His dimensions, 72 mm x 27 mm, allow a correct support of the foot and some marks have been recorded in the body to ensure the precision in its assembly, which allows the regulation in inclination.

The Vintage footrests are available in black and silver, weigh 90 grams and are ABE approved and TÜV certified.

R-Fighter Footpegs

The R Fighter footpegs are designed for the most racing riders, who need to have the maximum support and total confidence in the most compromised situations when they are riding their motorcycle.

The design of this component is inspired by the teeth of a gear. It is of light construction, since it is machined on an anodized aluminum block, which also provides a better surface and a higher quality finish.

The entire contour of the R Fighter footpegs offers the rider an optimum grip regardless of the position of the boot, which translates into the greatest possible safety in any circumstance, regardless of the type of driving that is being carried out at any time, be it on a tourist route, alone or with a companion, or searching for limits in a circuit on trackdays.

The range of footpegs R Fighter consists of the R model, metallic, and the model S, which has a rubber case that eliminates engine vibrations, which gives the rider greater comfort when riding.

R-Fighter S Footpegs

The R-FIGHTER S footrests from Puig are developed to offer the rider and the passenger optimal support in any circumstance.
Like the other models in the range, the S is adjustable and is manufactured from an aluminum block, which has been given an anodized finish and some markings have been engraved to ensure the highest precision in its assembly.


What distinguishes this footrest is its high quality rubber case, which reduces vibrations while maintaining maximum grip. Its light construction (weighs only 90 grams) and balanced dimensions (74.5 mm long and 26 mm in diameter) make the R-FIGHTER S an ideal complement for the biker who frequently performs a dynamic riding but does not want to give up certain levels of comfort during the route.


Available in red, gold, blue, black, silver and green, this footboard from the Hi-Tech Parts family of Puig also reinforces the personality of the motorcycle and adapts it to the personalization preferences of each biker.

Enduro Footpegs

The Puig enduro footpegs are designed specifically for crosstourer motorcycles. The moto, by allowing the use in all kinds of scenarios, requires assembling versatile components capable of adapting riding for each terrain.

The enduro footpegs have on/ff rubber bands that can be removed or put back on quickly. Its measures, 95 mm long and 60 wide, provide the driver with a wide support surface, ideal for comfortably facing the most complicated routes and safely traversing prolonged stretches.

Made of anodized aluminum, they are extremely robust and lightweight at the same time (440 gr.). They are adjustable in inclination and have some marks with which ensures an optimal mounting precision. They are available in blue, black, gold, silver, red, orange and green.

They have the TÜV certification and the ABE document.

Trail Footpegs

The Puig trail footpegs are specially designed for tourer-type motorcycles and offer maximum grip and comfort to the driver in any circumstance thanks to the rubber installed in the contact area of the boot. These footpegs are made of anodized aluminum and are distinguished by their modern and sporty design, designed to become the ideal component for the most versatile bikes and an attractive touch of personalization.


They measure 85 mm long and 51 mm wide and weight only 130 gr. Ergonomics is a priority during development and has increased its free height to the ground. Consequently, the bike has a greater angle of inclination. They are adjustable on rotation and marks have been engraved on the body to ensure a more precise assembly.


The trail footpegs provide the driver with greater confidence while riding his bike, both at a fast pace on twisty roads where more precision and tact is required, and on long journeys on open roads where many hours are spent on of the motorcycle.
As part of the Puig tuning range, the trail footpegs are available in a wide variety of colors, which allow the biker to choose his ideal combination to match his device: blue, black, gold, silver, red, orange and green.


For the assembly, parts of the original footpegs are used and for each motorcycle the driver and passenger fitting kit must be purchased separately.
They have the TÜV certification and the ABE document.

Heritage Footpegs

The footrests Heritage model by Puig are the answer to the lovers of the purest sensations of motorcycle driving. Available in black, in keeping with its retro looks but modern conception, they adapt perfectly to the most personal style of the biker and motorcycle. Its design, in addition, provides an optimum level of grip. These are made of aluminum and can be adjusted at taste thanks to the rotational regulation system. 

Hi-Tech Ascent Grips

Improve your motorcycle’s handlebar with PUIG’s HI-TECH ASCENT grips.

Manufactured from billet aluminium and anodized in various colors, it will be the perfect choice to replace the stock’s motorcycle grips.
The inner rubber of the grip is very pleasant to the touch, it has a non-slip texture to guarantee greater adherence from the motorcyclist’s hands.
The HI-TECH ASCENT cuffs have a length of 119mm and weight reduction of 94gr. They are suitable for handlebars that have a diameter of 22mm and incorporate adapters for the gas rod.

It must be taken into account that the HI-TECH ASCENT grips are not compatible with Ride by Wire electronic system.

Sours: https://puig.tv/en/bybike/kawasaki_z400_2019
  1. Key minho
  2. Terraria food recipes
  3. Compressor current relay
  4. Milwaukee screwdriver bits

Z400 '19-

Z400 '19-

Moto Machines offers premiere motorcycle accessories for 700+ motorcycle models. Here you will find protection, luggage carriers, and much more for your Kawasaki Z400. Featured motorcycle brands including Hepco and Becker, Mivv, Amphibious, and More! Check out the Hepco and Becker panniers for the Kawasaki Z400 to add motorcycle luggage to your bike. Moto Machines is proud to offer different exhaust options from Mivv, which will give your Z400 more power and sound! Be ready for the next ride and shop at Moto Machines today for all the available motorcycle parts and accessories! - Moto Machines offers premiere motorcycle accessories for 700+ motorcycle models. Here you will find protection, luggage carriers, and much more for your Kawasaki Z400. Featured motorcycle brands including Hepco and Becker, Mivv, Amphibious, and More! Check out the Hepco and Becker panniers for the K ... Read more

Z400 '19- - Moto Machines offers premiere motorcycle accessories for 700+ motorcycle models. Here you will find protection, luggage carriers, and much more for your Kawasaki Z400. Featured motorcycle brands including Hepco and Becker, Mivv, Amphibious, and More! Check out the Hepco and Becker panniers for the Kawasaki Z400 to add motorcycle luggage to your bike. Moto Machines is proud to offer different exhaust options from Mivv, which will give your Z400 more power and sound! Be ready for the next ride and shop at Moto Machines today for all the available motorcycle parts and accessories! Shrink

Sours: https://www.motomachines.com/shop-by-bike/kawasaki/z400-19
BASIC ACCESSORIES FOR KAWASAKI Z400 AT ZERO ONE MOTO - LEO VINCE EXHAUST SYSTEMS - TAKARA TIRES - QC

"As you say. " - "Come to me. I get up, get up, go up to him, stand between his legs. He takes me by the waist, turns my back to him. Leaning my hands on the table, bending over slightly.

Accessories z400

I am blonde, very light, almost white. Very small stature (152 cm. ), With small breasts, but for some reason large, eternally protruding nipples. Another great advantage of mine is a small round ass that everyone wants to touch.

Z400 Upgrade - EP 2 - LED Indicators, Integrated Tail Light, Bar End Mirrors, Rim Stickers

She drank more than half, but then she felt sick, and covering her mouth with her hand, from vomiting spasms, she put down the. Mug and got to her feet. It was clear that Galya was fighting with sperm in the stomach suitable for the throat.

You will also like:

Walking along the path, they noticed a shop and decided to rest. And then suddenly he kissed her, on her sweet lips, very gently embracing them. Katya in surprise pushed the stranger away and screamed. But her lips were still warm from the hot kiss and, weakly controlling herself, she herself dug her lips into him.



1031 1032 1033 1034 1035